How to fix hang on logo in Samsung Galaxy A52 ?
Your Samsung Galaxy A52 is in bootloop because of firmware corruption, you need to fix it to start using your device.
We are going to explain all the steps, how you can repair stuck on logo by flashing official stock rom. Follow complete guide to learn that is very simple.

Step 1.
Download and install Samsung usb drivers in your pc. Then restart it to complete installation.
Step 2.
Download and save Odin3 flash tool also. This tool is used to install firmware in Samsung mobile devices only.
Step 3.
Download and save flash file (firmware file) for Galaxy A52 in your pc. You need to extract this file to get stock rom. Remember, only get the original firmware for your mobile model only. You can't flash another file in your device.
-
Launch odin3 flash tool.
-
Click on BL and load the BL file from the file you extracted.
-
Click on AP and load the AP file.
-
Click on CP and load the CP file.
-
Click on CSC and load the CSC file.
-
Now power off your Samsung Galaxy A52.
-
Boot in download mode by pressing volume down key and power key together. Then press volume up key to continue. If you can't go in download mode with this method then, press volume key and then insert usb cable to boot in download mode.
-
Now click on start button.
-
It may take some time to complete flashing, when you see pass message in odin3, you can disconnect your device.
-
First boot may take 5-10 minutes after flashing firmware.
-
Hang on logo will be solved by This method.
Remember before flashing.
-
Charge device battery to 50%.
-
Backup your data before flashing as it erase all data from your device completely.
-
Only download firmware for your mobile model.
-
Don't disconnect your device during flashing.
-
Use a original usb cable.
-
make sure your pc is viruses free.
Samsung A52 SM-A525F required tools for firmware installation.
Samsung usb drivers | Get it |
Odin3 flash tool | Get it |
Flash file | Get it. |
About Samsung Galaxy A52.
Brand | Samsung |
Model | Galaxy A52 |
Ram | 6GB |
Rom | 128GB |
Processor | Qualcomm Snapdragon 720G |
Battery | 4500 Mah |
Operating system | Android 11 |
Front camera | 32MP |
Rear camera | 64MP, 12MP, 5MP, 5MP |
What to do if you face any error while flashing your mobile device ?
If you are unable to complete firmware installation or flashing stuck at middle, then you need to remember these steps.
-
Try to update your flash tool.
-
Download another firmware file or latest file for your device model.
-
Check your usb cable.
-
Check your mobile charging usb port.
-
Make sure your computer system has enough memory.
-
Try restarting your pc and flash again.
-
Keep patience.